Hardware Installation; Input; Control Buttons - wortmann terra LCD 4217 Bedienungsanleitung

Tilting
For viewing clarity, you can tilt the LCD backward (up to 20 degrees).

Hardware Installation

Be carefully to your LCD monitor, it's very exquisite but easy to broken. Turn off LCD's and PC's power
before you set it up. Follow our installation step by step.

Input

【1】AC Input：This is for connecting the power cable.
【2】VGA PORT : This can be connected with the D-Sub 15 pin signal Cable.
【3】DVI port : This can be connected with the DVI signal Cable.
【4】Audio In：This can be connected to the PC audio-out connector of sound resource.
*NOTICE: DVI and Audio functions are optional features.

Control Buttons

There are 5 keys for user to set up the monitor, including "Auto Adjust", "OSD Menu", "Power", "Adjust
<->", "Adjust <+>". The following descriptions are the introduction of these Keys :
Auto Adjust (Function)--
AUTO
Hotkey: Press this button to apply the monitor setting automatically.
Menu (Function)--
MENU
Hotkey: Press this button to get a pop-up OSD menu.
Power: Turn the LCD power on and off. When the power is on, the light is showing blue,
Stand by (No Signal Input) will be orange.
-
Adjust < - >: OSD Function select & Decrease the option value in the OSD menu.
+
Adjust < + >: OSD Function select & Increase the option value in the OSD menu.
3