Troubleshooting; Supported Timing - wortmann terra LCD 4217 Bedienungsanleitung

Troubleshooting

Make sure that your monitor is properly installed if you have encountered any trouble using this
product.
˙ There is no picture on the screen.
Check: 1. Power saving mode. Press any key and move the mouse to deactivate the mode.
2. Signal cable connector pins. If there are bent or missing pins, consult your place of
purchase.
˙ Characters look too dark or too light
Check: Using OSD Menu to adjust the Brightness.
˙ When your monitor shall be adjusted?
Check: If the resolution of frequency is being changed.
˙ The text appears on the screen are unclear.
Check: Make sure the resolution or refresh rate match with the Display Mode.

Supported Timing

No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
A = Analog Mode; D = Digital Mode, G = Sync On Green Mode
If the input timing is closed to one of the above, generally it can be displayed well by optimum adjusting.
Description
VGA640×400
VGA640×480
VGA720×400
VESA 640×480
VESA 640×480
VESA 800×600
VESA 800×600
VESA 800×600
VESA 1024×768
VESA 1024×768
VESA 1024×768
VESA 1152×864
VESA 1152×864
VESA 1280 x 768
VESA 1280 x 768
VESA 1280×960
VESA 1280×960
VESA 1280×1024
VESA 1280×1024
H-Freq. (KHz)
31.480
31.649
37.469
37.862
37.500
35.156
48.077
46.875
48.363
56.476
60.023
54.948
66.095
47.400
60.300
60.000
75.000
63.981
79.977
9
V-Freq. (Hz)
70.000
60.000
70.000
72.809
75.000
56.250
72.188
75.000
60.000
70.000
75.000
60.057
70.016
60.000
75.000
60.000
75.000
60.000
75.000