Quick Installation - wortmann terra LCD 4319 HA Bedienungsanleitung

Quick Installation

1. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
2. Connect audio cable
Connect the audio cable from audio output of computer to the audio input of the
monitor.
3. Connect DVI cable
Connect the DVI cable from DVI output of computer to the DVI input of the monitor.
4. Or Connect Analog video cable (VGA cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to
5. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
6. Windows users:Setting the Timing Mode (Resolution and Refresh Rate)
Recommended:
Resolution Right-click on the Windows desktop > Properties > Settings >
"Desktop Area". Set the resolution.
Refresh Rate (vertical frequency) See your graphic card's user guide for instructions.
the computer, then to the monitor.
19"
1280 x 1024 @ 60 Hz
3