Buffalo DriveStatio Duo Benutzerhandbuch Seite 9

To Windows Users
The message below may be displayed when you try to change the
disk confi guration (such as by selecting NTFS format) using the RAID
Management Utility.
If this message appears, wait until the changes to the disk confi guration
are complete and "The setting was successfully changed" is displayed,
then click [Cancel]. The disk is now ready to use.
If you inadvertently click [Format disk] in the above message, one of
the following things will happen.
If "You do not have suffi cient rights to perform this operation" is
•
displayed, click [OK].
If "Not Formattable" is displayed, click [Close].
•
If the standard Windows format screen is displayed, click [Close].
•
Note: If the drive is formatted with the Windows format utility,
changes to the disk confi guration may not complete normally.
If this happens, use the RAID Management Utility to set the
disk confi guration again.
Using the RAID Utility
9