Troubleshooting - Buffalo DriveStatio Duo Benutzerhandbuch

FAQ
The following is a list of common issues with the DriveStation. Following
each issue are possible resolutions.
I cannot see the DriveStation in My Computer. (Windows)
Verify that the POWER light is on. If it is not, then ensure that the
power switch is in the AUTO position.
If you have installed the Power Save Utility, then verify that the
DriveStation was not put into power saving mode. Consult the
manual for the Power Save Utility for additional help. The manual
can be found on the DriveNavigator CD-ROM.
Verify that the hard drive inside the DriveStation is spinning. This
can be verifi ed by placing your hand on the sides of the case
and feeling for a slight vibration. Also, after the DriveStation has
been powered on for fi fteen minutes or more it will begin to get
warm. If neither of the proceeding tests verifi ed that the hard drive
is spinning, then please contact technical support for further
assistance.
My backup program can't save fi les to the DriveStation.
Reformat your DriveStation with NTFS or Mac OS Extended.
FAT32 is limited to 4 GB fi lesizes.

Troubleshooting

15