Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
When activating the reference, enter the required value using the Up/Down keys (15, 16).
The icon
appears in the display indicating that readings are measured with a reference
altitude. If the required unit has not been set yet, press the Set key (18) and return to this menu
item later. When turning the reference off, also press the Set key (18) afterwards.
4.
Next, set the refresh interval for the recording. Using the Up/Down keys (15, 16), you can
select between 1, 10, 30 and 60 minutes.
5.
Press the Set key (18). The altitude unit indicator starts flashing. Using the Up/Down keys (15,
16), set the required unit.
6.
Press the Mode key to save the settings or press the Set key (18) again twice to return to the
reference setting before saving the settings.
Recording and playback of altitude readings
You can set the time interval for the recording in the altimeter settings. See chapter
10.1.
The stopped recording cannot be continued. To start a new recording, first empty
the memory.
You can also playback the stored data during the recording.
1.
To start recording, press the Up key (15).
2.
The icon
starts flashing, indicating that recording has commenced.
3.
You can stop the recording at any time by returning to the Altimeter mode and by pressing and
holding the Up key (15). The icon
new measurement the data has to be deleted.
4.
The recording will automatically stop when the memory is full. This will happen after 30 time
intervals have passed and 30 data records have been saved. The display will show the
message FULL.
5.
To playback the stored data press the Set key (18). The icon
of the temperature, the number of the data record will be shown, above it the stored altitude
record, and below it the date and time of the recording (alternating automatically). You can
toggle between the data records using the Up/Down keys (15, 16).
6.
To empty the memory, press and hold the Set key during the playback until the message CLR
(clear) appears. Now you can start a new recording.
7.
End the playback by pressing the Set key (18).
11.
Other functions
Torch
1.
To turn the torch on, press the Torch key (19).
2.
To have the torch flash, press the Torch key (19) again.
3.
To turn the torch off, press the Torch key (19).
26
indicates that data has been saved. Before starting a
will be displayed. Instead
Background lighting
1.
To activate the background lighting, press the Background lighting key (20).
2.
The display will be illuminated for 4 seconds before the background lighting is turned off again
automatically.
Thermometer
You can set the unit for temperature via the date/time settings. See chapter 8.1.
The thermometer measures the current temperature.
Key lock
The key lock can only be activated in Barometer mode, while the time is displayed
in Clock mode.
1.
To activate the key lock, press and hold the Up key (15) and the Down key (16)
simultaneously.
2.
The icon
will be displayed.
3.
To deactivate the key lock, press and hold the Up key (15) and the Down key (16)
simultaneously.
12.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
27
Werbung
Kapitel
Inhaltsverzeichnis
