Operation Menu - Watts 10021160 Bedienungsanleitung

3/ Operation Menu:

GB
3.1/ Automatic and Off operation:
- To put your system in Automatic operation, press
the "Automatic" line and press
- To put your system in Off mode repeat the same sequence of above.
3.2/ Manual testing operation:
- In this mode you can check the working of Pump1, Pump2/Valve and
extra outputs. You can also check the values of all sensors inputs.
(re: the sensor input not used are noted with the maximum value)
- To activate the output select the desired line with
to highlight this line. Now with
outputs.
- The pumps activation start with the minimum value xx% adjusted on the
"Setting" menu (see below part 4.7) and you can increase this value up to
100% by 5% steps with
- Remarks: when you exit this menu all outputs are turned off.
- Press
Operation
Automatic (Active)
Off
Manual testing
Manual testing
Pump1
Pump2 (or Valve)
Tank
T1 _ _°C
T3 _ _°C
key.
Manual testing
Pump1
Pump2
Tank
T1 _ _°C
T3 _ _°C
repeatedly to return to the main menu.
----------------- -- -----
-
to active this working mode.
------------------ --
T2 _ _°C
T4 _ _°C T5
or you can active the different
----------------- --
-
T2 _ _°C
T4 _ _°C T5
8
or to select
-
0%
0%
0%
_ _°C
or and press
90%
0%
0%
_ _°C