Philips beauty HP6409 Handbuch Seite 8

ENGLISH
8
After epilation, you can apply a mild cream or lotion to help
reduce possible skin irritation. It will make your skin feel
smoother and will give you a fresh sensation. Do not use lotions
that contain alcohol.
Using the appliance
Attaching and removing the shaving or epilating head
1 Make sure the appliance is switched off.
2 You can remove the shaving or epilating head by pushing the
ribbed section with your thumb in the direction of the arrow
indicated on the back of the shaving or epilating head and then
lifting it off the appliance (fig. 2).
3 You can attach the shaving or epilating head by placing it onto the
appliance and pushing it against the direction of the arrow
indicated on the back of the shaving or epilating head until it
snaps home (fig. 3).
You will hear a click when the shaving or epilating head snaps into
place.
Connecting the appliance
1 Insert the appliance plug into the appliance (fig. 4).
2 Insert the mains plug into the wall socket (fig. 5).
Epilating the legs
1 Switch the appliance on by selecting the desired speed.
Select speed I for areas with little hair growth, for hard-to-reach
areas and for areas where bones are located directly beneath the
skin, such as knees and ankles (fig. 6).
Select speed II for larger areas with stronger hair growth (fig. 7).
2 Stretch the skin with your free hand to make the hairs stand
upright (fig. 8).