Philips beauty HP6409 Handbuch Seite 11

1 Switch the appliance off (fig. 11).
2 Remove the mains plug from the wall socket (fig. 22).
3 Remove the shaving or epilating head by pushing the ribbed
section with your thumb in the direction of the arrow indicated
on the back of the shaving or epilating head and then lifting it off
the appliance (fig. 2).
4 Clean the epilating discs of the epilating head and all other parts
that have become accessible with the brush supplied (fig. 23).
5 Clean the shaving head in the following way: (fig. 24).
- Remove the shaving foil from the cutter block.
- Clean the hair chamber, the cutter block and the foil with the brush.
Attach the shaving or epilating head by placing it onto the
appliance and pushing it against the direction of the arrow
indicated on the back of the shaving or epilating head until it
snaps home (fig. 3).
Maintenance
1 Put the protective cover on the shaving head after use.
2 Rub a drop of sewing machine oil onto the foil of the shaving
head twice a year.
Replacement
If you use the appliance two or more times a week, we advise you to
replace the shaving foil and the cutter block every 1 to 2 years.
A worn or damaged shaving foil may only be replaced by an original
Philips shaving foil (type no. HP6116).
The cutter block is available under type no. HP2911.
ENGLISH
11