Placement And Mounting - Ecler AMBIT103 Bedienungsanleitung

5. PLACEMENT AND MOUNTING

Consider following general rules:
Place the acoustic enclosures on solid and firm surfaces.
No obstacles should stand between the enclosures and the audience.
Although the speakers can be used outdoors, they should not be directly exposed to sunlight or
rain.
Always adjust the output sound pressure levels to the reproduction requirements. Despite their
small size, they can produce significantly higher pressure levels than home speakers.
The AMBIT packaging contains everything you need to install the enclosure:
•
Two brackets.
•
Allen screws to anchor the box.
•
Miscellaneous screws and rawlplugs for the wall.
•
Safety runners.
•
One L-shaped Allen wrench.
Speaker cables can be hidden from view by choosing an adequate mounting orientation.
Although the inconspicuous AMBIT logo suggests mounting the unit with the input connectors on the
upside and the selector switch on the downside, the enclosure can be mounted in any orientation
because the high frequency driver is concentric and the adhesive logo can be positioned anywhere.
The following diagram shows you how to install
the AMBIT103 using the accessory supplied, so that
it can be oriented both vertically and horizontally.
NOTE: As a general safety rule, remember to put
the runner in place and also that the screw marked
"1" should be placed at the upper part of the
support, so that if it becomes loose, it will not fall.
Other installation possibilities:
The AMBIT103 has 4 nuts inserted in the rear at a standard diagonal distance of 60mm, to
permit the safety sling screw to be housed and to be coupled to a standard bracket.
Ecler offers a wide range of mechanical accessories that can be used to group several AMBIT,
thus enhancing their versatility even more. Please refer to your Ecler distributor or visit
www.ecler.com for all existing possibilities.
6
1