Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Maintenance And Cleaning; Declaration Of Conformity (Doc) - Renkforce BS108T Bedienungsanleitung

Bluetooth-lautsprecher
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

d) Pair both speakers as a two channel system
• Switch the OFF/ON slide switch to the ON position to activate both speakers.
• Press the
button on the product for approximately 6 seconds until the red and
blue LED flashes.
• Both speakers are connected with each other after a few seconds. The red LED is
permanently lit.
As soon as both speakers are connected to each other, it does not matter
which of the two speakers is connected to the Bluetooth
The speaker, which is paired with the Bluetooth
main speaker (left channel). The red and blue LED lights up.
The audio playback can only be controlled via the main speaker (see the
following subchapter).
e) Audio playback
• You can control the audio playback via the product upon successful connection if
your Bluetooth
device supports A2DP and AVRCP.
®
• Press the
button to start or interrupt the audio playback.
• Press the
button to increase the volume.
• Press the
button to reduce the volume.
• Hold down the
button to skip to the next title.
• Hold down the
button to skip to the previous title.
f) Hands-free equipment
• A soon as a call is received on your Bluetooth
button to answer the call.
• Press the
button again to end the call.
• The play back is interrupted during the call if you have played music from your
Bluetooth
capable telephone via the product before taking the call. The playback
®
is automatically continued as soon as the call is ended.
g) Cable connected audio playback
• You can also connect a conventional, non-Bluetooth
MP3 player) to the product. Use the enclosed audio cable for this purpose.
• Switch off the product as well as the playback device.
• Connect one end of the cable to the AUX audio input on the product.
• Connect the other end of the cable to the matching connector of the playback
device.
• Switch on the product and the playback device and start the audio playback.

Maintenance and cleaning

• Besides occasional cleaning, the device is maintenance-free.
• Do not use any abrasive or chemical cleaners.
• Never submerge the product in water to clean it.
• To prevent scratch marks, do not apply too much force on the surface during
cleaning.
• Use a dry, clean, soft and lint-free cloth to clean the housing.

Declaration of Conformity (DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare
that this product conforms to the fundamental requirements and the other relevant
regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at
www.conrad.com.
device.
®
device, is defined as the
®
capable telephone, press the
®
capable playback device (e.g.
®
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
The built-in rechargeable battery must be disposed of by a specialist.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to
indicate that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead
(name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical data

Input voltage / current........................5 V/DC, 325 mA (max.)
Rechargeable battery.........................lithium, 380 mAh
Bluetooth
version ..............................2.1 + EDR
®
Supported profiles ..............................A2DP, AVRCP, HFP, HSP
Power output .......................................2 W
Frequency response ...........................100 Hz – 20 kHz
Range ....................................................max. 10 m
Battery playback time ........................approx. 1.5 h
Speaker Ø .............................................40 mm
Dimensions (Ø x H)..............................68 x 63 mm each
Weight ...................................................approx. 114 g each
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
V1_0814_02-ETS-Mkd

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis