Renkforce BS108T Bedienungsanleitung Seite 3

Operating instructions
BS108T Bluetooth
Item no. 1093098
Intended use
The product is designed for audio playback via a connected Bluetooth
from that the product features hands-free equipment as well as an audio input (3.5 mm
jack) for cable connection to a suitable audio playback device (e.g. MP3 player).
Power is supplied via the integrated rechargeable battery. The rechargeable battery
may only be charged via a suitable USB connection.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided at all times.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• 2 x speakers
• USB charging cable
• Audio cable (80 cm)
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Do not place any open sources of fire such as burning candles onto the
product or in its immediate vicinity.
• Use the product in temperate climates only, do not use in the tropics.
speakers
®
• The rechargeable battery is permanently built into the product and cannot
be replaced.
• Never damage the rechargeable battery. Damaging the casing of the
rechargeable battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw
the rechargeable battery or the product into fire. There is a danger of fire
and explosion!
• Charge the rechargeable battery regularly, even if you are not using the
product. Due to the rechargeable battery technology being used, you do
not need to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive.
It is normal that a certain amount of heat is generated during charging.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
device. Apart
®
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
a) Charging the rechargeable battery
The integrated rechargeable battery must first be charged before start up.
The USB connection, via which the rechargeable battery is charged, must
provide an output current of at least 500 mA. Normally this is guaranteed for
all computer USB connections.
The charge time amounts to approximately 90 minutes.
• Connect the product to the USB connection of a computer or another suitable USB
power supply (e.g. power adapter with USB output) via the USB charging cable
provided.
• The red LED lights up during the charging process.
• The red LED goes out as soon as the charging process ends.
b) Turning on/off
• Switch the OFF/ON slide switch to the ON position to switch on the product.
• The product can now paired with a Bluetooth
paired with a Bluetooth
• Switch the OFF/ON slide switch to the OFF position to switch off the product.
c) Pairing
• The product must be located in the immediate vicinity of the Bluetooth
• Switch on the Bluetooth
mode. Please refer to the operating instructions of the Bluetooth
• Switch on the product. The blue LED flashes at an interval of 2 seconds.
• Press the
blue LED flashes. The product then searches for Bluetooth
area.
• Activate the search for the product on your Bluetooth
Speaker" appears on the list of your Bluetooth
process is complete.
• Select "TWS BT Speaker" on your Bluetooth
and enter the code 0000 on request.
• The blue LED on the product lights up as soon as the pairing procedure is complete.
• Switch off the product and repeat the whole procedure if the pairing procedure was
not successful.
Only one single Bluetooth
connection must first be interrupted if an active Bluetooth
another Bluetooth
The connection is interrupted if the product or the Bluetooth
which there is an active pairing, is switched off or removed from range. The
connection is again automatically established when the Bluetooth
is switched on again or put in the range of the product.
This function on the Bluetooth
this automatic set up connection (please refer to the instructions of your
Bluetooth
®
device, the connection is established to this device
®
device and activate the Bluetooth
®
button on the product for approximately 3 seconds until the red and
device to establish the connection
®
device can be paired with the product. This
®
device already exists.
®
device needs to be activated to enable
®
device).
®
device. If the product is already
device.
®
function or the pairing
®
device.
®
devices in the reception
®
device. The "TWS BT
®
device as soon as the search
®
pairing with
®
device, to
®
device
®