Recording; Recording Methods And Connections - Aiwa AM-F70 Bedienungsanleitung

The INPUT jack of this unit tan accept
digital Signals, analog Signals (line output),
and Sound Signal from the microphone.
According to the Source Signal and output
connections properly as follows.
Connect the plugs completely.
l
the optical digital output) -+
High quality recording is possible since the
digital Source Signals from a CD, etc. are
not converted into analog Signals.
The playing time and index mark data of the
TOC (Table of contents) are recorded
automatically at the same time. This is
CD.
This unit tan record digital Signals from
DAT and BS/CS tuners as this unit has a
built-in sampling frequency rate converter.
@Optical Square shaped plug
available)
This unit tan be connected to only Optical
l
output jacks for digital recording.
q