MC Crypt PP8A Bedienungsanleitung Seite 3

Operating Instructions Operating Instructions
PP8A Mobile Universal Box
Item no. 31 09 20
Use in accordance with manufacturer's instructions
The mobile Universal Box is used to amplify and reproduce low level audio signals.
The input may only be connected to the low-level audio outputs from audio devices.
This product is only intended for connection to 220 – 240 V/50 – 60 Hz and approved only for safety sockets.
The product may only be used indoors; never outdoors. Do not expose to moisture, for example, in bathrooms
or similar spaces.
Any use other than that described above will lead to damage to the product and involves other risks, such as
short circuits, fi re or electrical shocks.
No part of the product may be modifi ed or converted in any way. Do not open the housing!
The safety instructions must be observed at all times.
This product complies with the national and European legal requirements.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions! We will not assume liability for any resulting damage.
We do not assume any liability for material and personal damage caused by improper use or
non-compliance with the safety instructions. In such cases the warranty will be null and void.
The exclamation mark symbol indicates important information in these operating instruc-
tions. Prior to starting up the product, read the operating instructions right through; they
contain important information on correct operation.
The lightning symbol in a triangle warns you against unprotected live components or ele-
ments inside the housing or "live" connection points. Coming into contact with these
components or connection points may be fatal.
Cables connected to such connection points may only be connected by an expert or you
must use ready-to-connect cables.
The device contains no parts that are to be serviced by the user. Therefore, do not open
the device.
• For safety and approval (CE) reasons, unauthorised conversion and/or modifi cation of the product is not
permitted.
• Never touch the mains plug when your hands are wet.
• The device is manufactured according to protection class 1. Only a proper earthed power outlet (220 - 240 V/
50 - 60 Hz) on the public supply grid can be used as a voltage source.
• Extra care should be taken when using the device for the fi rst time. Therefore, please follow the operating
instructions carefully.
• Note also the safety and operating instructions of the other devices that are connected to the speaker.
• Make sure the mains cable is not squashed, bent, damaged by sharp edges or otherwise subjected to me-
chanical strain. Avoid excess thermal stress on the mains cable due to excess heat or cold. Do not modify
the mains cable. This may damage the mains cable. A damaged power cable can result in a life-threatening
electric shock.
• If the power cable is damaged, do not touch it. First, switch off the appropriate mains socket (e.g. via the
respective circuit-breaker) and then carefully pull the mains plug from the socket. Separate the mains cable
from the device. Never use the product if the power cable is damaged.
• In order to completely separate the device from the mains, you have to remove the mains plug from the wall
socket. It is is not suffi cient to turn off the speaker with the on / off switch.
• Ensure adequate ventilation of the device during operation. Do not cover the device with magazines, blan-
kets, curtains or similar. Keep a minimum distance of approx. 5cm from other devices.
• This product is not a toy, it is not suitable for children. Children are not aware of the potential dangers
involved when using electrical devices.
• Never pour liquids over electrical devices and never place objects fi lled with liquid on top of them (e. g.
vases). You run the risk of causing a fi re or a fatal electric shock. If this is the case, de-energise the appropri-
ate socket (e.g. switch off circuit breaker) before removing the plug-in mains unit from the socket. Disconnect
all cables from the device. Afterwards, the product can no longer be used; take it to a specialist workshop.
• Do not place naked fl ames such as burning candles on top of the device.
• If you store any magnetic media such as diskettes, video cassettes, etc. in the vicinity of the speaker, the
magnetic fi eld of the loudspeaker can corrupt the information stored on these media.
• Do not listen to excessively loud music for long periods of time.
• This may damage your hearing.
• Do not expose the speaker to high temperatures, dripping or splashing water, strong vibrations or high
humidity.
• Only use the product in a moderate climate, never in tropical climates.
• Do not leave packaging material lying around carelessly.
• It may become a dangerous plaything for children.
• Moreover, please observe the additional safety instructions in the individual chapters of this operating
manual.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insurance company
for Electrical Systems and Operating Materials are to be observed. As the operator, you must obtain informa-
tion from the authorities in charge and you are responsible for observing the applicable laws and regulations.
• If in doubt about how to connect the device correctly, or should any questions arise that are not answered
in these operating instructions, please contact our technical advisory service or another specialist.
• If you have doubts about how the equipment should be operated or how to safely connect it, consult a
trained technician.
Product Description
• separately adjustable microphone and line input with XLR connector
• 3.5mm jack input for connecting MP3 players or other stereo devices
• 20 cm woofer
• Treble tweeter with 25 mm silk dome
Version 05/11
• Built-in limiter with LED indicator
• 3 band equaliser
• Carrying handles
°
• Rugged upholstered surface
• Protective corners
• High output power
Connection and Control Elements
(1) STEREO IN connector
(2) LINE IN connection
(3) MIC IN connector
(4) Status indicator
(5) BASS control
(6) MID control
(7) HIGH control
(8) LINE control
(9) MIC control
(10) MASTER control
Set-up
When setting it up with other equipment, make sure that the appliance is well ventilated.
Keep a suffi cient distance from heat sources. Adjust the speaker so that it is not in the
direct vicinity of heat sources such as heaters. Do not point any strong beams or light
sources onto the device. This may lead to overheating (risk of fi re!).
Heat dissipation from the device must not be obstructed. Never cover the device. The air
circulation must not be obstructed by objects such as magazines, tablecloths, curtains or
similar. This prevents heat dissipation from the device and can lead to overheating (risk of
fi re!).
Do not drill or screw any additional screws into the case for fi xing. This might allow con-
tact with dangerous voltages.
Make sure that the connection cable is not being crushed or damaged by sharp edges.
Always lay the cables so that nobody can trip over them or become entangled in them.
Risk of injury.
The cables must have a suffi cient length. Avoid mechanical strain on the cables. This may
damage the cables or the device. There is a danger of fatal electric shock.
Do not place the speakers directly in the vicinity of screens, such as television sets or
computer monitors. The magnetic fi eld from the loudspeakers might distort the image on
such devices.
Only operate the speaker on a stable surface that is not sensitive to heat.
When setting up the device, make sure that it has a stable base and that the set-up location
is suitably stable. If the speaker falls, serious personal injury may result.
Hanging the speaker up by the handles or similar devices must not be done.
• Place the speaker in the desired location.
• Align the sound outlet as desired.