Package Contents; Explanation Of Symbols; Safety Instructions - Renkforce 1590183 Bedienungsanleitung

Operating instructions
HDD docking station USB3.0
with encryption function
Item no. 1590183
Intended use
The docking station can accommodate an 8.9 cm/3.5" or a 6.35 cm/2.5" SATA HDD/SSD (not
included). The operation is possible via a USB 3.0 interface (compatible with USB 2.0/1.1). The
external wall plug transformer enclosed is used to supply the current/power.
The data on the inserted HDD/SSD can be encrypted against unauthorised access
(AES-256) with a password of up to 12-digits.
For safety and compliance reasons, the product must not be converted or modified in any way.
If you use the product for other purposes than those described above, the product may be
damaged. Moreover, improper use involves risks such as short-circuits, fire, electric shocks,
etc. Please read the operating instructions carefully and do not discard them. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with the statutory, national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.

Package contents

• Docking station
• USB 3.0 cable
• Plug-in power adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.

Explanation of symbols

The lightning symbol inside a triangle is used when there is a potential risk of per-
sonal injury, such as electric shock.
An exclamation mark inside a triangle indicates important instructions in this operat-
ing manual which must be adhered to.
The arrow symbol indicates specific tips and advice on operation.

Safety instructions

Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work should only be carried out by an expert
or a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Plug-in power adapter
• The design of the plug-in power adapter complies with IEC Protection Class II
(double insulated electrical appliances). Use only a standard mains socket as the
power source for the power adapter.
• The power socket into which the power adapter is inserted must be easily ac-
cessible.
• Use only the power adapter provided to power the docking station.
• Do not pull the power adapter from the mains socket by pulling on the cable. Hold
it on the sides of the casing and pull it out of the mains socket.
• Never touch a power adapter that shows signs of damage, as this could cause a
fatal electric shock!
First, switch off the mains voltage to the socket to which the power adapter is con-
nected (switch off at the corresponding circuit breaker or, for example, remove the
safety fuse or switch off at the corresponding RCD protective switch, so that the
socket is fully disconnected).
You can then unplug the power adapter from the mains socket. Dispose of the
faulty power adapter in an environmentally friendly way, do not use it any more.
Replace it with a power adapter of the same design.
c) Operation
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet!
Power adapters pose the potential risk of a fatal electric shock!
• Choose a stable, even, flat and sufficiently large surface for setting up the docking
station.
• Never use the product immediately after moving it from a cold room into a warm
one. The condensation that forms may damage the product under certain circum-
stances. A power unit also carries the risk of a potentially fatal electric shock!
Allow the product to reach room temperature before connecting it to the power
supply and putting it into use. In some cases, this may take several hours.
• When setting up the product, make sure that the cables are neither kinked nor
pinched.
• Do not move the product with a hard disc installed when the disc is in use. Move-
ment during operation may cause the write/read heads in the hard drive to make
contact with the magnetic disk. This may not only lead to data loss but may also
damage the hard drive! The same applies to the 30-second period after the dock-
ing station has been switched off, until the magnetic disk in the HDD drive has
come to a standstill.
Of course, this does not apply to SSDs because they have no moving parts.
Connection
• Switch on your computer, if not done yet, and wait until the operating system has finished
loading.
• Connect the round low voltage plug from the enclosed power adapter to the corresponding
jack on the back of the docking station.
• Connect the power adapter to the mains voltage; i.e. plug it into a mains socket.
• Connect the USB 3.0 plug on the rear side of the docking station to a free USB port on your
computer using the USB 3.0 cable supplied.
The fast transfer mode is only used when using a USB 3.0 port; the maximum data
transfer speed is respectively lower at USB 2.0 or USB 1.1 ports.
• Place the docking station on a level, firm and sufficiently large area.
The docking station with the HDD drive installed must not tip over; an installed HDD
drive will be damaged by this (especially when the docking station is switched on
and the HDD drive is in use).
Protect valuable furniture surfaces by using a suitable mat to prevent scratches or
pressure points.