Renkforce 1052377 Bedienungsanleitung Seite 4

Positioning the hands
If the hands do not agree with the time displayed digitally, positioning must be per-
formed manually. This step is also necessary after a battery replacement.
Press button B (2) for longer than 5 seconds.
• The hands begin to run, and the indicator in the display flashes 00:00.
• To move the hands manually, press button A (1).
The hands will stop now.
If you press button A (1) briefly, the hands are moved stepwise. If you press a little
longer, the hands begin to run automatically, which you can stop by pressing button
A (1) again.
• When the hands have reached the 12 o'clock position, press button B (2) briefly.
• The watch now starts a reception attempt.
• The watch automatically sets itself to the correct time after successful reception.
Setting the Time Manually
If time signal reception is not possible, the watch can also be set manually.
However, the precondition is that the 12 o'clock positioning of the hands has been
performed correctly (see "Positioning the hands").
Press button B (2) for approx. 2 seconds.
• Set the mode for the summer time change with button A (1):
AUTO = automatic change for summer/winter time
ON = manual setting for summer time on
OFF = manual setting for summer time off
• Press button B (2) again and set the hours using the push-button (A).
• Proceed as described above to set the minutes, the seconds, the year, the month
and the date.
• Button B (2) is used to select the value to be adjusted, and the corresponding value
can be changed with button A (1).
• Finally, press button B (2) to save the settings and to return to the normal display
mode.
• The hands run automatically to the set time.
Display reading
• The time is normally shown in the display.
• Press button A (1) to show the date and month.
• Press button A (1) again to show the seconds and the weekday.
• Press button A (1) again to show the set time zone.
• Press button A (1) again to return to the time display.
• The DST symbol (5) appears in the display during summer time.
Changing the Batteries
• If a battery symbol is shown in the display (7), the battery has to be replaced.
• Replacing the battery should be done by a specialist, using special clockmaker tools
and professional knowledge.
• To replace the battery, the back of the casing is removed.
• The battery can then be removed from its holder and be replaced.
Restart after Replacing the Battery
• After a battery change, the 00:00 indication will flash in the display.
• Position the hour and minute hands to the 12:00 position, as described in "Position-
ing the hands".
• The watch now performs a reception attempt and will set itself to the correct time,
after successful reception.
Maintenance and cleaning
The product does not require any maintenance and should never be disassembled for
any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use aggressive detergents as these can cause discolouration of the case.
Shock Resistance
In normal use, the wristwatch is protected against shocks. Nevertheless, do not ex-
pose the device to extreme shocks such as might occur if e.g. the device falls onto
a hard surface. This may damage the clockwork or the position of the hands may be
changed (Positioning the hands is described earlier in this manual).
Water tightness
Please take note of the labelling on the watch and its meaning.
Label Suitability
none The watch has to be protected against water
3ATM Washing your hands, rain, water spray
5ATM See above + bathing, showering
10ATM See above + swimming, snorkelling
20ATM See above + free diving
Shortening the strap
• For minor adjustments, move the spring peg on the catch into another hole.
• If greater adjustments are necessary, one or more links can be removed from the
strap. To do so, please contact a clockmaker, who has suitable tools for this kind of
work.
Disposal
a) Product
E lectronic devices are recyclable waste materials and must not be disposed
of in the household waste!
Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Remove the battery if there is one inserted and dispose of it separately from
the product.
b) Normal and Rechargeable Batteries
As the end user, you are required by law (Battery Regulation) to return used batteries
and rechargeable batteries. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries contain harmful materials and are labelled
with the symbol shown to indicate that disposal in the household waste
is forbidden. The symbols of the relevant heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead (marking can be seen on the battery/rechargeable
battery, e.g. underneath the refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at
the official collection points of your community, in our stores, or anywhere
batteries or rechargeable batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Operating voltage............................... 3 V/DC
Battery ................................................. 1 x lithium coin cell CR2016
Battery lifespan .................................. approx. 1 year
Weight .................................................. 108 g
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that
this product conforms to the fundamental requirements and the other relevant regula-
tions of the directive 1999/5/EC.
You can view the conformity declaration for this product at
www.conrad.com.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.