Operation Method - Klarstein 10009948 Bedienungsanleitung

Made by professional enterprise of electric blanket, have domestic First-class production equipment,
adopt double-layer all circuitry Safe protection electric heat wires, have really realized that update to the
Safe, healthy, comfortable type from the ordinary cold-proof type:
1. Health and Environmental protection: Adopt the pollution-free electromagnetic radiation shield
technology; stop the injury of electromagnetic wave radiation to the human body.
2. comfortable and gratified: It adopts the multi-temperature adjustable control, breaks the traditional
electric blanket has limitations to the human body with only high and low two low grades, you can
choose the most comfortable temperature that fit yourself.
Every product has passed strict test and every index all reach the national standard such as
EN 60335-1:2002 and EN 60335-2-17:2002.
Lay the electric blanket flat on the bed. The end of no control is the Foot. Fix the four corners fasteners
of the electric blanket on the four corners of the bed or the mattress with the nonmetal belts, only spread
sheets or thin cotton-padded mattress on the blanket, so help to conduct heat and find whether the electric
blanket drape, lay the quilt flat on the sheet can use the electric blanket safely.
• General temperature adjustment: Plug power cord into an AC230v-50Hz wall outlet (do not
connect this appliance with DC) before bedtime. Push shift button to „3 position „, the power
indicator lamp glows, and the electric blanket begin to heat. Normally, preheat 30minutes, can
push shift button to „3, 2 or 1 position" according to need so as to keep sure temperature when
falling asleep, or to „0 position" and stop heating (the power indicator lamp goes out).
• Three – setting temperature controller adjustment: turn on the switch, the power indicator lamp
glows, put the knob to „3 position „, the electric blanket enter the high temperature heating
status, can sleep after heat 30 minutes, adjust the knob can select numerous temperature after
going to bed. You can adjust the temperature knob according to your need until you feel comfortable.
When the electric blanket runs, the control must uncover in the position easy to use , make sure not to
put under the quilt or the pillow, and are covered by other things, let alone close to other heating source
in case that the control is overheated and damaged , and cause the contingency.
To guarantee users to use the electric blanket safely, try the best to avoid the contingent contingency,
especially remind users to pay attention to the following item:
1. Pay attention to observe the power cords, plug, soft cords used connect the appliance and control
whether have unusual situations before using, if unusual and can't confirm whether it is safe or
not, don't continue to use, please send it to the technological service departments of our factory
or service center to maintain or check.
2. During using, should check regularly the electric blanket is leveled, fixes firmly and no-fold or
no-roll, deal with the situation that influence normal use in time.
3. Often check whether there is wear and tear mark on the appliance (including the soft cord), if
there is this kind of phenomenon or this appliance has already been used by mistake, should
return to supplier's place before using next time.
4. The heating wire in the electric blanket should space evenly, wire smoothly, no cross, no trap and
no fold between wires, do not use when there is not accord with the above, and send it to the
technological service departments of our factory or service center to deal with. Check method: lay
the electric blanket flat on the bed; touch the heating wires with hand.
Product summary

Operation method

Daily checks and safeguard
8