Technical Data; Product Description; Use And Operation - Klarstein 10029111 Bedienungsanleitung

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Item number
Power
Power adapter
Dimensions (W x H x D)
1. Insert the adapter into the adapter socket and plug it into the electrical outlet.
2. Open the front cover, then use your index finger and thumb to hold the watch pillow from the two sides of
the pillow hitch marked with two arrows. With some force, pull out the watch pillow .
3. Place the watch around the watch pillow by pushing
in the spring in the back of the pillow , then placing
your watch around the pillow , then let go off the
spring (see picture). Once the watch is on the pillow
, place the pillow back into the winder. Push until you
hear a click signifying that it is securely in the winder.
4. Close the cover. Use Power switch to select winder
rotating direction or turn off the unit. Use TPD-switch
to select the TPD you want. (mode A-D).

Technical Data

10029111, 10029112, 10029114
100-240 V ~ 50-60 Hz
4 V / 550 mA
240 x 148 x 178 mm

Product Description

Use and Operation

4