Lavorwash DYNAMIC A4 Bedienungsanleitung Seite 26

1. TABLE OF CONTENTS
2. GENERAL INFORMATION
2.1 MANUAL PURPOSE
2.2 TERMINOLOGY AND SYMBOL LEGEND
2.4 SPECIFIC USE
2.5 TECHNICAL MODIFICATIONS
3. SAFETY INFORMATIONS
3.1 BASIC RECOMMENDATIONS
3.2 NOISE AND VIBRATIONS
4. HANDLING INFORMATION
4.1 PACKING LIFTING AND TRANSPORT
4.2 CHECKS UPON DELIVERY
4.3 UNPACKING
4.4 ASSEMBLY AND ADJUSTMENT OF THE GRIP
4.5 LIFTING AND TRANSPORT: MACHINE,
BATTERY AND BATTERY CHARGER
5. TECHNICAL INFORMATIONS
5.1 GENERAL DESCRIPTION
5.2 BATTERIES
5.3 BATTERY CHARGER
5.4 STRUCTURE AND FUNCTIONS
5.5 MACHINE
5.6 BATTERY
5.7 BATTERY CHARGER
5.8 CIRCUIT BOARD SETTINGS CONFIGURATION
5.9 ACCESSORIES
6. INSTALLATION INFORMATION
6.1 BATTERY PREPARATION
6.2 BATTERY INSTALLATION AND PREPARATION
6.3 BATTERY CHARGER CONFIGURATION
6.4 MACHINE PREPARATION
7. OPERATING INFORMATION
7.1 BATTERY CHARGING
7.2 BRUSH ASSEMBLY / DISASSEMBLY
7.3 MACHINE TRANSPORT
7.4 SQUEEGEE ASSEMBLY
7.5 SQUEEGEE DISASSEMBLY
7.6 SQUEEGEE BLADES DISASSEMBLY /
ASSEMBLY
7.7 SPLASH GUARD ASSEMBLY/DISASSEMBLY
7.8 ACCESSORY ASSEMBLY/DISASSEMBLY
(BRUSHES, PAD DRIVERS AND ABRASIVE
DISKS)
7.9 FILLING AND DRAINING THE DETERGENT
SOLUTION TANK
7.10 DRAINING THE RECOVERY TANK
7.11 ADJUSTING THE SOLUTION WATER FLOW
7.12 DRIVING THE MACHINE
7.12 WORK METHOD
7.13.1 PREPARATION AND WARNINGS
7.13.2 BATTERY CHARGE LEVEL CONTROLS
7.13.3 DIRECT SCRUBBING OR FOR SLIGHTLY DIRTY
SURFACES
7.13.4 INDIRECT SCRUBBING OR FOR VERY DIRTY
SURFACES
7.13.5 POST-SCRUBBING OPERATIONS
7.14 SPECIFIC INSTRUCTIONS FOR THE USE OF
MODEL AC 230V
8. MAINTENANCE
8.1 TANKS
8.2 SOLUTION FILTER CLEANING
8.3 SUCTION HOSE
8.4 SQUEEGEE
8.5 ACCESSORIES
8.6 MACHINE BODY
8.7 BATTERIES
8.8 PERIODIC MAINTENANCE
8.9 RECOMMENDED SPARE PARTS
9. OPERATING CHECKS
9.2 PROBLEM SOLVING GUIDE
10. CONDITIONS OF WARRANTY
10.1 DISPOSAL (WEEE)
26