Exclamation Mark - F-SECURE SENSE Kurzanleitung

Display
No lights
Whole display lit
Static squares
Pulsing squares
Pulsing
connection
Four (4)
numbers
Rotating squares
Plus sign
Exclamation
mark
Updating
Reset
Factory reset
Time
What it means
SENSE has no power.
The display brightness
is too low.
SENSE is booting up.
SENSE is ready for
pairing.
Internet connection to
SENSE is down.
Pairing code. This
appears after you press
blue pairing button.
SENSE is connecting
or verifying an action
done by the app.
Action completed.
SENSE has
encountered an issue.
SENSE is updating its
software and will
restart automatically.
The SENSE router was
reset.
The SENSE router was
reset and restored to
factory settings.
You are online and
protected.
What to do
Check that the SENSE
router is plugged in.
Change display
brightness from the app
settings.
Wait for a few minutes.
If nothing happens,
unplug the SENSE router
and then plug it in again.
If the problem persists, a
factory reset is needed.
Press the blue button on
the back of the SENSE
router.
Check for loose cables
or try restarting your
router.
Follow the instruction in
the SENSE app.
This may take a moment.
Follow the instruction in
the SENSE app.
No action needed. Get
ready for the next step.
Check the SENSE app.
Keep the SENSE router
plugged in and follow
the instructions in the
SENSE app.
Wait for the SENSE
router to restart and
then set it up.
Enjoy!
English • Quick guide 5