F-SECURE SENSE Kurzanleitung Seite 4

Connect your other devices to the SENSE network either by using WiFi or an
Ethernet cable.
• For WiFi, go to your device settings and connect the device to the newly
created SENSE network.
• If you are using an Ethernet cable, plug it into an available port (labelled 1,
2, or 3) on the SENSE router.
Note: You can find the network name and password in the SENSE app under
Devices > Add new device.
The SENSE app installation
After setting up your SENSE network, be sure to install the SENSE app
onto all supported devices for maximum protection.
Android, iOS
Download the F-Secure SENSE app from the App store or Google Play or
start by scanning the QR code below.
Windows, macOS
Once you have connected your computer to the SENSE network, navigate
your browser to http://sense.router and follow the instructions.
SENSE display
The SENSE router comes with a display that lets you know what is happening
with your connected devices.
When the display shows the time, you have
nothing to worry about - SENSE is running
normally. If you see an exclamation mark, it means
that SENSE has encountered an issue and you
need to open the SENSE app. It could be that we
have introduced a cool new feature or that SENSE
has discovered malware.
The display also provides messages during the
setup process along with the app. The table
explains the various icons you might see.
4 English • Quick guide
f-secure.com/sense/download