Hama Solar Bluetooth Bedienungsanleitung Seite 16

Select „Explore Bluetooth device".
Tap „No device selected".
30
The Bluetooth GPS receiver is detected as „BT GPS".
Tap the icon for the GPS receiver to establish a
connection.
Select „SPP slave" and tap „Next" to proceed.
The connection with the GPS receiver is established.
Tap the icon until a selection menu opens.
In the menu that appears, select „Properties".
Tick the box next to „Authentication" and select OK
to fi nish.
Tap the GPS receiver icon again until the selection
menu opens. Select „Connect".
You will then be asked to enter the passkey for the
GPS receiver. It is „0000".
31