Inhaltsverzeichnis
Werbung
Introduction
Model FR1
Model FR2
Features
FR1 Features
The AJA FR1 and FR2 are multiple-card frames that support both AJA's R-series
video card modules and other industry standard modules. They bring high-
density packaging, high capacity power supplies, and forced fan cooling to
your rack—so you don't need to reserve space above or below the frames.
The FR1 frame offers space for four modules in a 1-RU space. AJA's own R5 and
R20 modules fit into the frame, as well as industry standard modules. Color
black reference can be connected at a rear panel BNC for distribution passively
to all frame modules.
The FR2 frame provides greater space, housing up to ten modules in a 2-RU
space. Like the FR1, the FR2 supports both AJA's own R-series modules as well
as industry standard modules. Color black reference in the FR2 is also
distributed to all modules, but it's actively distributed rather than passively.
Optional redundant power supplies are available for the FR2 frame, and all
power supplies are easily hot-swapped from the front of the unit (one screw on
the rear panel must be removed on each power supply prior to removal).
The FR1 and FR2 frames offer a variety of unique features for easy connectivity
and ease of installation in any environment.
FR1 and FR2 Frames
• Dual fan forced-air cooling
• Optional redundant power supply, diode isolated
• Universal power supply is auto-ranging from 90 to 240 VAC with 50 Watts
capacity
• 4 module slots (cells)
• Each module cell is provided with 9 BNC inputs or outputs
• Single frame reference BNC distributes passively to all cells
• Remote power supply monitoring via RJ45 port on rear panel
• Power LEDs on front panel show power status
• Compatible with common industry frames—video cards only (Leitch™
6800-series)
AJA FR1 and FR2 Video Card Frames User Manual
3
1
Werbung
Inhaltsverzeichnis
