Grundig Wet and Dry MC 9542 Bedienungsanleitung Seite 23

POWER­SUPPLY
Mains­operation­­
(with­mains­adapter)
Check if the mains voltage on the sup-
plied mains adapter type plate cor-
responds to your local mains supply.
The only way to disconnect the device
from the mains supply is to unplug the
adapter.
1
Insert the mains adapter plug into the
F
socket.
2
Insert the mains adapter plug in the
socket.
– The built-in batteries are switched
off.
Note
When in the bathroom or beside a
7
water connection, you must only use
the appliance in battery mode; never
run it from the mains.
­ _ ___________________________________
ENGLISH ­ 2 3