Power Supply; Operation­with­ ­ R Echargeable­batteries - Grundig Wet and Dry MC 9542 Bedienungsanleitung

POWER­SUPPLY
Operation­with­
­ r echargeable­batteries
When using the built-in rechargeable
nickel metal hydride batteries, use the
mains adapter supplied as a charger.
1
Plug the mains adapter into the
socket, and plug the mains adapter
into the mains socket.
– The indicator
– The green status displays show
how the charging is progressing.
They flash until the respective
capacity has been reached (20,
40, 60, 80 and 100 %) and then
remain lit.
– Once charging is complete, all
status displays are lit in green.
Notes
Completely charge up the batteries
7
(24 hours) before you first use them
or if you have not used them for a
long time.
After the batteries are first charged,
7
the charging time is approx. 12 hours
when the appliance is switched off. If
you switch on the appliance while it
is charging, charging will stop.
The ambient temperature should be
7
between 5 °C and 40 °C.
­ 2 2 ENGLISH
­ _ ___________________________________
F
lights up red.
G
When fully charged, the appliance
7
works for around 45 minutes. It is
not advisable to charge the batter-
ies after every use, especially if you
do not use the appliance for the full
45 minutes. Only charge the batter-
ies when they are completely dis-
charged. This increases their life. Do
not charge them every day.
The green status displays show the
7
capacity of the respective recharge-
able batteries. If, for example, a
capacity of only 40 % is reached,
the green displays 20 and 40 light
up. If the rechargeable batteries are
completely empty the red charge
indicator flashes.
Using­the­charging­unit
1
Plug the socket
into the plug in the charging unit.
2
Plug the mains adapter cable into the
socket of the charging unit.
3
Insert the mains adapter plug in the
socket.
Note
Ensure that the appliance and the
7
charging station are completely dry
before charging.
F
of the appliance