Cleaning Before Use; Cutting Inserts - hanseatic LW-6508G1 Gebrauchsanleitung

Cleaning before use

Before first use, wash all parts of
the spiralizer, except the motor
unit, (4) with conventional wash-
ing liquid or place them in the
dishwasher.
Assembling the
spiralizer
1. Place the motor unit (4) on the
collecting container (5).
Using for the first time

Cutting inserts

These cutting inserts are suitable
for the following products:
(4)
(5)
Page GB-9
For making spirals
with a thickness of
2.2 mm. E.g. for po-
tato spirals that are
then fried.
F o r c o n t i n u o u s
strips with a cross
section of 2.5 mm ×
5 mm.
E.g. for vegan pasta
made from carrots
or courgettes.
For continuous strips
with a cross section
of 2 mm × 3.5 mm.
E.g. for carrot and
cucumber strips in a
salad.