Wohler VIS 230 Bedienungsanleitung Seite 43

Push rod
Carrying case
Camera head
- Push and pull smoothly
- Do not exceed rod end limit
- Do not bend or drag across sharp edges
WARNING!
Dry and clean the rod with a cloth, before pulling it
back, so that no dirt and soot can enter!
- Avoid any liquids getting inside the case.
- Do not drop the case.
- Protect the lens of the camera head
against scratches.
NOTE!
Originally the camera head VIS 3xx is protected
by a plastic dome, which can be substituted by a
glass dome if necessary. Alternatively a glass
dome can be purchased that must be screwed
onto the camera head!
Working with the camera
EN
43