Safety Instructions; Risk Of Electric Shock - Silvercrest SHTT 2200 B1 Bedienungsanleitung

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the hairdryer only to a correctly installed mains power
►
socket providing electrical current at the level detailed on the
rating plate.
Under no circumstances may the hairdryer be submerged in
►
liquids, or liquids be permitted to enter the appliance housing.
Do not expose the appliance to humidity and do not use it
outdoors. If liquid gets into the housing, disconnect the
appliance from the mains power socket immediately and
have it repaired by a qualifi ed technician.
Unplug the hairdryer from the power socket if defective opera-
►
tion is apparent and before cleaning it.
To disconnect the appliance, pull only on the plug itself, not
►
on the power cable.
Do not wrap the power cable around the appliance and
►
protect the cable from being damaged.
To avoid potential risks, damaged mains cables should be
►
replaced by the manufacturer or the manufacturer's customer
service department or a similarly qualifi ed person.
Do not kink or crush the power cable and route it in such a
►
way as to prevent people from stepping on or tripping over it.
Do not use extension cables.
►
Never touch the hairdryer, the power cable or the plug with
►
wet hands.
Disconnect the hairdryer from the power source immediately
►
after use. The appliance is completely free of electrical
power only when you unplug it.
You must not open or repair the housing of the hairdryer.
►
Doing so can lead to risks and also invalidates the warranty.
Arrange for the hairdryer to be serviced and repaired only
by qualifi ed specialists.
■ 4 │ GB │ IE │ NI SHTT 2200 B1