Technical Characteristics; Safety Precautions - Fagor SP-1815 Gebrauchsanweisung

1. DESCRIPTION
1. Air inlet
2. Cold air button
3. Temperature selector
4. I/O switch and air flow selector
5. Hanging ring
6. Nozzle

2. TECHNICAL CHARACTERISTICS

SP-1815 & SP-2005I
Voltage /Frequency 220 V – 240 V~/ 50 Hz
Wattage
1800 W / 2000 W
This product complies with the European
Directives on Electromagnetic Compatibility
and Low Voltage.

3. SAFETY PRECAUTIONS

• Before using this appliance for the first
time, read the following instructions
carefully and keep them for future
reference.
• Make sure that the mains voltage
in your home corresponds to that
indicated on the appliance.
• In the event of incompatibility between
the mains socket and the appliance
plug, replace the socket with a suitable
one, using a qualified professional.
• The use of adaptors, multiple sockets
and or extension cables is not
recommended. Where it is not possible
to avoid their use, only adaptors or
extensions that comply with applicable
safety regulations should be used, and
ensuring that the indicated voltage limit
is not exceeded.
• After removing the packaging, check
that the appliance is in perfect
condition, if in doubt, contact the
nearest Technical Support Service.
• Packaging elements (plastic bags,
polystyrene foam, etc.), should not be
left within the reach of children because
they can be dangerous.
•
The appliance is for domestic use only.
EN
Any other use is considered unsuitable
or dangerous.
•
The manufacturer shall not be
responsible for any damages that may
arise from improper or inadequate
use, or for repairs conducted by non-
qualified personnel.
•
Do not touch the appliance with wet or
damp hands or feet.
•
Keep the appliance separate from
water or other liquids, to avoid electric
shock; do not connect the appliance to
the mains if it is on a damp surface.
• Place the appliance on a dry, firm and
stable surface.
• Do not allow children or the disabled to
handle the appliance unsupervised.
• Do not leave the appliance unattended
when it is turned on because it can be
dangerous.
• When removing the plug never pull on
the cable.
• Unplug the appliance before cleaning
or maintenance.
• In the event of fault or malfunction
where the appliance is not to be used,
turn off the appliance and do not
attempt to repair. If a repair is required,
contact a Technical Assistance Service
authorised by the manufacturer and
request the use of original spare parts.
• If the cable for this appliance is damaged,
contact an authorised Technical
Assistance Service for it to be replaced.
• Do not leave the appliance exposed to
the elements (rain, sun, ice, etc.).
• Do not use or let any part of the
appliance come into contact or near
hot surfaces (kitchen gas or electric
hobs or ovens).
•
Do not use detergents or abrasive
sponges to clean the appliance.
•
Do not touch the hot surfaces. Use the
handles.
• Do not let the cable come into contact
with the hot parts of the appliance.
• Make sure that the switch is on "0"
before plugging in or unplugging the
hair dryer.
• Check that the voltage of the domestic
power supply is the same as that
indicated on the appliance.
7