Introduction; Intended Use - Viatom Checkme Pro Benutzerhandbuch

your doctor. In particular, do not start taking any new medication or change the
type and/or dosage of any existing medication without prior approval.
2.

Introduction

2.1 Intended Use

The Checkme Pro health monitor is intended to be used for measuring, displaying,
reviewing and storing of multiple physiological parameters including ECG, pulse oxygen
saturation (SpO ), pulse rate, temperature and blood pressure variation in home or
2
healthcare facilities environment.
ECG and Blood pressure variation is intended for use with adult.
The data and results provided by this device are for pre-check screening purpose only
and cannot be directly used for diagnostic or treatment.
2.2 About Checkme
1. Touch Screen
2. Infrared temperature sensor
3. Internal SpO
4. LED indicator

Off: the monitor is turned off or working in Standby Mode;

Green: the monitor is turned on, and working normally; or when the battery
is fully charged;

Blue: the battery is being charged;

Red and flash: the battery is low;
5. Multi-functional connector
It connects with external SpO
6. Home, Power On/Off

When the monitor is off, press this button to power it on.

When the monitor is on, press and hold it for 2 seconds to turn it off.
sensor
2
2
1 2
cable, ECG cable, or charging cable.
3
3
4
5
6
7