Viatom Checkme Pro Benutzerhandbuch Seite 15

Relax your forefinger and do exert pressure.
4. When the device detects stable waveform, it will automatically start the
measurement. The countdown bar moves from left to right.
5. When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Please refer to Section 2.5 to understand the result screen.
Measuring with Cable
1. Connect the external SpO
2. Put your index finger or middle finger into the external SpO
the cable is positioned along the top of the hand, and the finger nail is in the
position as shown below.
3. If the device is in Calendar Screen, press the Home button.
4. Tap the <Pulse Oximeter> icon.
5. The display will then show your PLETH waveform, SpO
sensor to the multi-functional connector.
2
14
sensor. Make sure
2
Finger nail position
and pulse rate.
2