Getting Started First Time Installation - Salora 43UHL2600 Bedienungsanleitung

GETTING STARTED First Time Installation

)
1 Connect the TV to the TV Aerial wall socket
( )
Fig A
)
3 Insert 2 x AAA batteries not supplied into
the Remote control Take care to observe
correct polarity.
.
5 You will now be welcomed with the First Time
Installation screen. "Use <> to choose OSD
language,
signal being received is not strong enough The signal strength needs to be above 85
see the signal strength the TV is receiving when you change channels programmes You will need to
increase the signal reception in order to receive all of the channels available The most economical
way to do this is by purchasing and connecting a signal booster'
.
socket If this does not solve the problem you will need to upgrade the TV aerial to a digital hi gain
-
( )
.
compatible aerial.
. )
2 Connect the power cable to the wall socket
( )
Fig B
)
4 Switch on the television using the red power
button on the remote control or on the side of
your TV.
)
6 If you would like to to skip current tunning and
start another if you choose ATV DTV tuning
in the previous screen press MENU To cancel
,
completely press EXIT
. (
'
in between the TV and the TV aerial
,
06
,
( &
), .
.
% -
/ )
.
( )
you can
-