Special Safety Instructions - Ideen Welt GYS-1 Bedienungsanleitung

Special Safety instructions

a. This device is not intended to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the device by a person responsible for their safety.
b. Children should be supervised at all times to ensure that they do not play with the device.
c. In order to prevent danger, the device should not be used when other persons, especially children
are in the immediate vicinity. During and after operation, please keep children away from this tool.
d. Keep the tool in a dry location that is far enough away from heat and dangerous gases.
e. The surrounding conditions should be adapted to fit the tool and the task. This is a household tool
and should only be used as such. Do not use this tool for heavy duty work.
f. Make sure you have a good, solid foothold when using this cordless screwdriver. Many accidents
are caused by stumbling and falling.
g. If you dill into metal plates, you should use clamps or a vice. Secure the metal plates well onto a
firm base or in the vice. Place a piece of wood under the metal to be able to drill through I without
damaging the base underneath. Keep in mind that the metal plates could turn with the tool,
causing serious cuts.
h. Make sure that there no live wires around your workplace.
i. Prior to drilling, check the walls for cables (a metal detector may also be used). Do not touch the
chuck, the socket or the drill bit.
j. Do not try to take apart the device itself or the power adapter. Only qualified professionals may
service the device.
k. Should the recharger (the enclosure, cable or plug) be damaged, have it immediately replaced
through customer service. Do not use any other adapter other than the one supplied.
Warning:
• The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing on tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
• The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used.
GYS-1_4305615249742_120815.indb 17
17
17/8/12 11:57 AM