ZyXEL NWA-3166 Schnellstartanleitung Seite 9

Configure Wireless Settings
1 Click WIRELESS in the
navigation panel. A
screen similar to the
following appears. Not all
fields are available in all
models.
The wireless stations and the NWA must use the same SSID,
channel ID and encryption settings for wireless communication.
Operating Mode: Ensure that Access Point mode is selected.
802.11 Mode: Select the wireless standard you want your network to use. If you are
not sure which to select, select 802.11b+g.
Channel Width (802.11n/g, 802.11n/a mode only): Select the channel bandwidth
you want to use. If you are not sure, select 20/40 MHz.
Channel ID: Select the wireless channel you want your network to use. To have the
NWA automatically select a channel, click Scan instead.
Short GI (802.11n/g, 802.11n/a mode only): Select Enable if your wireless clients
support the short guard interval. If you are not sure, select Disable.
A-MPDU Aggregation (802.11n/g, 802.11n/a mode only): Select Enable if your
wireless clients support the Aggregated MAC Protocol Data Unit standard. If you are
not sure, select Disable.
ENGLISH
9