ZyXEL NWA-3166 Schnellstartanleitung Seite 5

1.1 LEDs
• The PWR/SYS LED turns steady green when the power is connected.
• The ETHN LED turns on if the ETHERNET port is properly connected, and blinks when
there is traffic. The LED turns green if the connection is at 10Mbps, and turns yellow if the
connection is at 100Mbps.
If the ETHN LED does not turn on, check the cable connection to the
NWA's ETHERNET port. Ensure your computer's network card is working
properly.
2 Access the Web Configurator
Use Internet Explorer 6.0 and later or Firefox 2.0 and later versions with
JavaScript enabled and pop-up blocking disabled.
2.1 Set Up Your Computer's IP Address
Note down your computer's current IP settings before you change them.
ENGLISH
5