Changing The Attachments - Grundig Clean White Plus TB 8030 Anleitung

OPERATION _______________________
1
Press On/Off and mode switch
to switch on the appliance.
– HIGH mode LED
blue and the appliance starts in
HIGH mode.
2
Press On/Off and mode switch
consecutively to select a mode.
– LOW mode LED
blue after pressing
HIGH mode.
– MASSAGE mode LED
up blue after pressing
in HIGH mode.
3
Press On/Off and mode switch
to switch off the appliance, regard-
less of the mode selected.
– The appliance switches off
after MASSAGE mode LED
disappears.
The 2 minute timer
Regardless of the mode selected, af-
ter 2 minutes the appliance switches
off automatically. Every 30 seconds
the appliance gives a vibration signal
for your timing.
Changing the
attachments
1
Remove the current attachment
from the holder by turning it in the
reverse direction of the arrows on
the attachment and the holder.
26 ENGLISH
2
B
lights up
D
3
B
lights up
E
once in
B
Note
lights
F
■
twice
B
B
F
Take the other attachment out of the
storage container for brushing and
cleaning attachments
Place the attachment on the holder.
Make sure that the notches of the
holder match the attachment. Turn
the attachment in the same direc-
tion of the arrows until it fits well
into place.
Replace the brush head when
the bristles become bent and
distorted and the wear indica-
tor becomes brighter at the side.
We recommend you to do this
every 4 months.
.
H