Technical Data; Noise & Vibration - Pattfield PA-1200BH Originalbetriebsanleitung

Technical Data

Nominal voltage
Rated power
No-load speed (n )
0
Impact rate
Impact energy
Max. drilling capacity
Protection Class
Sound pressure level (L
Sound power level (L
Max. vibration emission
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure. The declared vibration data rep-
resents the main applications of the tool, but
different uses of the tool or poor maintenance
can result in different vibration data. This may
significantly increase the vibration level over
the total working period.
An estimation of the vibration level should
also take into account the intervening periods,
when the tool is switched off or it running but
is not actually in use. This can result in a much
lower vibration load over the whole working
period.
Additional safety measure can be taken to
protect the user from effects of vibration:
Maintain the tool and its accessories, keep the
hands warm and organize work patterns.
88 EN
)
pA
)
WA
230 V / ~50 Hz
1200 W
800/min
4000/min
3.6 J
Concrete 26 mm
Steel 13 mm
Wood 40 mm
/ II
96.4 dB(A) / Uncertainty K = 3 dB(A)
107.4 dB(A) / Uncertainty K = 3 dB(A)
Hammer drilling into concrete:
a = 19.327 m/s / Uncertainty K = 1.5 m/s
2
h,HD
Chisseling:
a = 17,879 m/s / Uncertainty K = 1,5 m/s
2
h,CHeq
2
2