Start-Up; Insert Battery; Connect Your Receiver; Lnb If In Connector - TechnoTrend TT-micro S2810 Betriebs- Und Gebrauchsanleitung

4 Start-up

NOTE
Please read the other devices manuals also!

4.1 Insert battery

The battery box is at the back side of the remote control. Please
insert the batteries carefully without mixing up the polarity. Close the
box again.

4.2 Connect your receiver

ATTENTION
Please make sure all devices are switched off before
you plug in the power supply of the receiver.

4.2.1 LNB IF IN connector

Connect the IF IN antenna connector of the receiver with your LNB
or multi switch. In order to do that you have to attach the F-
connector of a suitable antenna cable (not included) with the IF IN
connector at the receiver. Depending on your installation you have
to attach the other end of the antenna cable either directly to a LNB,
a multi switch or a satellite TV wall socket.

4.2.2 Connect a TV

You have several options to connect a TV set to the receiver,
depending on the capabilities of your TV. Please choose one of the
following:
TT-micro S2810
Start-up
Start-up
¡ ¢ £ ¤
53
¥
¦
§
¨
©