Gerätebeschreibung - ZANKER Thermat AE 5000 Bedienungsanleitung

Instructions for the fitter
Fitting the appliance under­
neath worktops
The appliance can also be incorporated
into fitted kitchens or built-in-under after
the worktop has been removed.
Installation underneath worktops
must be carried out by a craftsman.
The following points must then be obser­
ved:
■ Pull out the mains plug.
■ Unscrew the fixing screws of the
worktop on the rear of the appliance
(see fig. 5).
■ Lift the worktop slightly at the rear,
slide forward, and detach.
Decorative trim panei
To match the colour of your appliance to
the rest of your kitchen, a decorative trim
panel can be fixed to the front of your
tumble dryer.
It is advisable to obtain this panel from
your furniture supplier. Only in that way
can acorrectcolourmatch beguaranteed.
The following dimensions must be accu­
rately complied with:
Height 588 mm
Width 588 mm
Panel thickness 1 to 4 mm max.
64
Fig. 5
A
___
1
If the appliance worktop is removed for
building-in-under in fitted kitchens, instal­
lation of the appliance must ensure that
neigher live parts nor parts with functional
insulation can be touched.
Necessary accessory: sheet metal
cover 916.24-9906
Necessary accessory: Trim panel
frame in white 916.24-9912 or in
brown 916.24-9913.
Fitting is simple:
■ Open the door.
■ Unscrew screws and remove.
■ Fit the larger part of the trim frame first,
so that the pin in the hinge fits into the
recess, and then initially screw on
loosely.
■ Push in front panel from the side and
screw trim frame tight.
■ Put on the other part of the trim frame
(pin into the recess) and screw tight.
Gerätebeschreibung
J
Abb. 1
1 Arbeitsplatte
2 Drucktasten und Signallampen
3 Programmschalter
4 Flusensieb
5 Typenschild
6 Luftkanal mit Gitter
7 Schraubfüße
8 Anschluß für die Abluftführung seitlich
2 3