Wechsel Des Türanschlags; Introducing Your Zänker Tumble Dryer - ZANKER Thermat AE 5000 Bedienungsanleitung

Introducing your ZÄNKER Tumble Dryer
This operating manual will help you to familiarize yourself quickly with
your tumble dryer, so that you can take full advantage of all its possibilities
and advantages.
Extremely high quality standards both during development and manufacture
guarantee a long service life for your appliance.
Maximum economy in the operation of your dryer is achieved through very frugal
electricity consumption and short drying times.
Your tumble dryer will provide you with relaxed, soft washing in any weather.
Your appliance uses the waste air principle. It should be possible to open a win­
dow during drying, to switch on a fan or to discharge the moist air through special
ducting into the open. When incorporating into fitted kitchens, waste air ducting
is absolutely essential.
Seven electronically controlled programs as well as a60 minute time-controlled program
are at your disposal for drying. In the "délicates" program, temperature-sensitive
fabrics are dried at reduced heat output. The cooling phase at the end of the program
and the subsequent crease protection phase prevent folds and creases.
The large-surface sensor in the drum surface monitors the moisture content of the
wash. When the preset degree of dryness has been reached, the program is termin­
ated automatically.
Contents________________________________________
Important notes/safety instructions...................................................................... page 53
Energy saving tips .............................................................................................. page 54
Description of the appliance ............................................................................... page 55
Technical data/dimensions .................................................................................. page 56
Installation............................................................................................................ page 56
Electrical connection ........................................................................................... page 57
Important instructions for drying ......................................................................... page 57
Before starting up for the first time ............................................................... page 57
Preparing for drying ..................................................................................... page 57
Holding capacity............................................................................................page 58
Laundry item weights ................................................................................... page 58
Controls, indicator lamps, etc............................................................................... page 59
Operation/Use ..................................................................................................... page 60
Program view ...................................................................................................... page 61
Maintenance and care ........................................................................................ page 62
Hints on rectifying minor faults ............................................................................ page 63
After-sales service............................................................................................... page 63
Instructions for the fitter ...................................................................................... page 64
Fitting underneath worktops ......................................................................... page 64
Decorative trim panel ................................................................................... page 64
Waste air connection .................................................................................... page 65
Washer/dryer stack........................................................................................ page 66
Changing over the door hinges .................................................................... page 67
52
Wechsel des Türanschlags
Wechsel des Türanschlags von links nach rechts
(s. Abb. 8 u. 8a).
Falls der Türanschlag (links) den örtlichen Ver­
hältnissen nicht entspricht, dann ist es möglich,
die Tür auf Rechtsanschlag zu ändern (Winkel dazu
ist beigefügt).
Handgriffe (s. Abb. 8):
1. Türstopper A aus Türbefestigung a aushaken
und aus Loch b durch 90°-Drehung heraus­
lösen.
2. Kunststoffteil aus Loch c durch 90°-Drehung
entfernen und in Loch b befestigen.
3. Scharnier B abschrauben (die 2 Schrauben
lösen, dabei Tür festhalten), Tür unten aus-
fahren.
4. Zapfen F von der Tür oben und unten jeweils
auf gegenüberliegende Seite umstecken.
Abb. 8
5. Türverschluß C durch Zusammendrücken der
beiden Laschen iösen (s. kieines Bild).
6. Gegenüberliegendes Kunststoffteil D wie Pos. 5
lösen (evtl. Hilfswerkzeug - Schraubendreher
o.ä.-verwenden).
7. Teile C und D gegeneinander austauschen und
einsetzen.
8. Schrauben E lösen und mitgeliefertes Scharnier
zunächst lose anschrauben.
Tür einhängen:
9.
■ Zuerst mit dem oberen Zapfen einführen,
■ dann mit den unteren Zapfen in das Scharnier
einfahren.
■ Vor dem Festschrauben des Scharniers Tür
ausrichten.
■ Scharnier festschrauben.
Stopfen aus Loch herausziehen und in Loch
10. d
befestigen.
11. Türstopper A in Loch c durch 90°-Drehung be­
festigen.
12. Türstopper A in Loch d einhaken.
A
17