Troubleshooting - GreenWorks 2400407 Bedienungsanleitung

PROBlEM POSSIBlE CAUSE
1. Battery is not secure.
Motor fails to start
when switch trigger
is depressed.
2. Battery is not charged.
1. Defective power switch.
Unit will not start.
The unit will start,
1. Blocked tube.
but air will not flow
through the tube.
English (original instructions)

TROUBlESHOOTING

SOlUTION
1. Ensure that the battery is fully secured in the blower. Refer
to Installing the Battery section in this manual.
2. Charge the battery pack according to the instructions
included with your model.
1. Have the power switch replaced by an authorized service
center.
2. Clear the blockage.
16