Temperature And Power Control In Variable Temperature Mode (Temp); Setting The Brightness - asmodus MINIKIN 155W BOOST Bedienungsanleitung

Using the Device
43

Temperature and Power Control in Variable Temperature Mode (TEMP)

In the main interface, simultaneously press the "+" or "-" buttons for two times to access the power settings in the
TEMP mode. Next, press the "+" or "-" button to increase or decrease the power. By pressing and holding on the "+"
or "-" button, it will rapidly increase or decrease. Press the Fire button to confirm the value and to end the process.
In the main interface, simultaneously press the "+" or "-" buttons to access the temperature settings in the TEMP
mode. By pressing and holding on the "+" or "-" button, it will rapidly increase or decrease. By exceeding or falling
short of the maximum or lowest possible temperature value in °C or °F, you automatically change to the other tempe-
rature unit. Press the Fire button to confirm the value and to end the process.

Setting the Brightness

Access the Brightness menu by pressing the Fire button rapidly 7 times while the device is switched on.
Press the "+" or "-" button to increase or decrease the display brightness. Use the Fire button to navigate
to the Exit menu. Press the "+" or "-" button to go back to the main interface.