AFRISO CO2-Sensor Betriebsanleitung Seite 27

6 Commissioning
6.1 Commissioning the product
1. Select a suitable power outlet.
2. Plug the product with the mains plug into the power outlet.
The LED lights:
- Green up to approximately 1000 ppm CO
- Yellow at approximately 1000 ppm CO
- Red at approximately 1500 ppm CO
3. The room should be ventilated if the LED lights yellow or red.
6.2 Teaching in
 Verify that the product is in the vicinity of the AFRISOhome gateway.
 Verify that the AFRISOhome gateway is in "Learn" mode. See the operat-
ing instructions of the AFRISOhome gateway for information detailed
information.
 If you intend to mount multiple products, start by creating a mounting plan
with the appropriate mounting locations. Then label the products with
numbers or the corresponding mounting location to help avoid confusion
of mounting locations.
Commissioning
.
2
.and more.
2
.and more.
2
1. Briefly press the LRN
pushbutton of the CO
sensor F with a screw-
driver.
- The CO
a Learn (LRNTEL).
- The CO
nected
to the EnOcean centre.
CO sensor / CO sensor F
2 2
EN
2
sensor F sends
2
sensor is con-
2
12