Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g Operating instruction
1. INTRODUCTION
The Remote Control allows you to operate the control panel remotely with a
press of a button. You can arm the system, disarm the system and activate
the alarm instantly.
In this package, you should find a remote control, with a 12V alkaline battery
installed.
Remote Control
Please follow the instructions below to program the remote control to the
AS-200 Series control panel.
2. LEARN REMOTE CONTROL TO AS-200 SERIES CONTROL PANEL
In order for the remote control to communicate with the control panel
properly, the remote control must be programmed to the control panel. Follow
the brief instructions below or refer to the detail instructions from the AS-200
Series User's Instructions to program the remote control to the control panel.
Step 1:
Press and hold the Learn Button on the Control Panel for 3 seconds. Control
Panel beeps once and you may release the Learn Button.
6
12V Lithium batter
Step 2:
Press the zone button (1, 2, 3, or 4) once, for which you want to program the
remote control to. The selected Zone LED will flash.
Press the zone button
Step 3:
Activate the Remote Control by pressing the red Panic Button.
Press Button
Press 3 sec.
Long Beep
Zone LED flashing
Control Panel long beep
Zone LED flashing OFF
7
Werbung
