Operation - JiaYuan sky spy Bedienungsanleitung

7. PREPARATION BEFORE FLYING
Place the helicopter carefully on the ground, turn the power switch
ON and ensure that the onboard LED is lashing. Stand behind the
helicopter with the helicopter's tail pointing towards you. Ensure
the transmitter's throttle is closed and then turn the transmitter ON.
When the transmitter's LED illuminates, you are ready for take off!

8. OPERATION

Ascending
Push the control
lever forwards
Descending
Pull the control
lever backwards
Left/Right Control Lever
Push to the Left
Left/Right Control Lever
Push to the Right
Forward/Backward
Push the Control
Lever forward
Forward/Backward
Pull the Control
Lever backward
Bank Left
Push the control
lever to the left
Bank Right
Push the control
lever to the right
When ascending or descending,
push the control lever forwards;
Ascending
the rotating speed of the main
rotor will increase and the
helicopter will ascend.
When the throttle stick is pulled
backwards the helicopter will
Descending descend as the rotating speed
of the main rotor will reduce.
When lying, pushing the left/
right control lever to the left will
Yaw
cause the nose of the helicopter
to turn left.
When lying, pushing the left/
right control lever to the right will
Yaw
cause the nose of the helicopter
to turn right.
During light, when pushing the
control lever forwards, the nose
of the helicopter will move
Forwards
downward and the helicopter
will travel forwards.
During light, when pulling the
control lever backwards, the
Backwards
nose of the helicopter will rise
and the helicopter will travel
backwards.
During light, push the
control lever to the left. This will
Bank Left
make the helicopter bank to
the left.
During light, push the
control lever to the right.
Bank Right
This will make the helicopter
bank to the right.
4
CAUTION
If the transmitter light
continues to lash, it means
that the transmitter batteries
are running out of power
and consequently will need
replacing before lying.