JiaYuan sky spy Bedienungsanleitung Seite 2

2. KIT CONTENTS (CONTINUED)
Helicopter
3. FITTING THE BATTERIES AND CHARGING THE HELICOPTER
1. Loading the batteries: Remove the single screw retaining the battery cover. Now remove the
transmitter's battery cover. Load 6 x AA batteries (not included) ensuring that the correct polarity
is observed.
2. Ensuring that the helicopter is switched off, connect the plug at the end of the charger's lead in the
helicopter's battery socket. Now plug the charger into a mains wall socket. When charging, the LED
indicator on the charger will be red. It takes around 2-1/2 hours to fully charge the battery from lat.
When the battery is fully charged, the LED indicator will turn green. The helicopter is now ready
to ly.
CAUTION
This R/C helicopter uses a Lithium Polymer battery. Please pay attention to the following safety items
below.
• Do not expose the battery to high temperatures - it may ignite
or explode
• Do not drop the battery or expose it to any harsh impact
• Do not allow the battery to get wet
• Store the battery in a dry and cool place
• Only use the charger supplied with this product to charge the
battery
• Do not attempt to disassemble the battery
• Do not charge unattended
Wireless Video
Transmitting Device
Aerial Camera
2
AC Charger
Transmitter with
Real-Time Video Display
Move the ON/OFF
Switch to the OFF
Position when
Charging
CAUTION
If you do not intend using
the helicopter for a long
time, ensure the power
switch is in the OFF position
and remove all batteries
from inside the transmitter.