Before First Use; Using The Vacuum Cleaner; Maintenance - RUSTA 901512900101 Gebrauchsanweisung

ENG

BEFORE FIRST USE

1. Straighten the handle until you hear a click, then the handle is in place.
2. Place the battery charger terminal close to a power outlet, insert the main body to
the battery charger, connect the power plug to the power outlet. This will start the
charging process.
CHARGE THE BATTERY IN THE FOLLOWING SITUATIONS:
• When using the product for the first time after purchase.
• When using the product after storing for a long time.
When the power plug of the battery charger is connected to a power outlet, the indica-
tion lamp will light up.
NOTE! The indicator light will not shut off after a charging cycle has been completed.

USING THE VACUUM CLEANER

1. Straighten the handle until you hear a click, then the handle is in place.
2. Press the ON/OFF button and hold for a few seconds to start the vacuum cleaner.

MAINTENANCE

1. Release main body from the handle.
2. Release the dust tank cover by pressing on the two buttons in its front.
3. Remove all dust inside.
4. To wash the dust tank, press the release button on top of it to release it.
5. Take out the HEPA filter and cyclone structure. Wash it carefully by hand with luke-
warm water.
6. After drying, assemble all parts back for using.
4