Programme Menu - Superior SP 7029/2 Bedienungsanleitung

MENU SYSTEM
Selecting channel
CHANNEL can be changed by "F" or "E" button, by
Digit Buttons or by the Double Digit button with digit
buttons.
For band C,
01 - 8,
For band S,
01 - 41.
Selecting Search
To start the search process, press "E" button for
forward search or "F" button for backward search.
SEARCH item blinks during search process, since the
process is stopped or signal is found. During search
process the semi-transparent menu background be-
comes „BLUE". To stop the search process "F" or "E"
button must be pressed again.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment
(after coarse adjustment), if you are not happy about
the image on the screen.
Use "F" or "E" button on FINE TUNING item, until
getting the best image on the screen.
In Channel option, normally the Fine Tuning cursor is
placed at the middle on the slider, and this is indicated
with the two reciprocal arrows.
To Store Settings
Press "F" or "E" button on STORE option to store
Install menu settings.

Programme Menu

• To enter Programme menu directly, press the "
button.
Moving cursor to four direction you can reach 0
programmes in the same page. By scrolling the pages
up or down by pressing the navigation buttons you can
select all the programmes in TV mode (except the AV
mode).
In menus, "H" or "G" buttons are working like „Direc-
tion Up" and „Direction Down".
By cursor action, programme selection is done automa-
tically. Selected programme is displayed with "CYAN"
characters. In order to select programme is also
possible by using digit or double-digit button. In this
way programme selection gets also automatically and
after selection the selected programme is displayed
with cyan characters. The TV Status is changed by the
programme selection too. When using double-digit
button in order to select a programme, the Programme
Number in TV Status OSD is displayed in „P --" form,
and by pressing digit buttons they are displayed in it.
Programme Number is between 00 and 99. Pro-
gramme Name has a name string with 5 characters.
After autostore process the Programme Names are set
to: „C-01" or „S-01" (band and channel number), as
default.
At the bottom of the menu there is a programme sort
functions section. Each function is activated by color
button (seen above). NAME allows changing the pro-
gramme name. By DELETE you can delete programmes
that you decided. INSERT section is for inserting pro-
grammes into another programme spaces. By selecting
AUTOSTORE section, A.P.S. menu will be available.
To change the name of a decided programme, that
programme is selected and pressed to the RED button
(NAME). The first letter begins to blank on the selected
name. To change that letter "H" or "G" button can
be used, and to select the other letters, "F" or "E"
button can be used. If the cursor is at the last letter of
the Programme Name, pressing "E" button moves the
cursor at the beginning. On the contrary, if the cursor
is at the beginning of the Programme Name, pressing
"F" button moves the cursor at the end.
"
After changing the name by pressing the RED button
(STORE) it is stored. After activating the name process
the "INSERT", "DELETE" and "AUTOSTORE" processes
29
GB