Feature Menu; Install Menu - Superior SP 7029/2 Bedienungsanleitung

MENU SYSTEM
wise, HUE option is invisible in Picture menu.)
• Using "H" or "G" button select Hue.
• Press "E" button to increase hue level.
• Press "F" button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
Mode
This item is used to change the picture size. By pressing
"F" or "E" button you may choose one of these
options: "4:", "16:9" and "AUTO". It is also possible
to change picture modes directly by pressing button
" " on your remote control.
• AUTO This allows to change the picture mode
automatically, according to the transmission of
the selected channel. For example, your TV is 4:
mode, but the transmission of that channel is in
16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is
in 4: mode and the picture ratio of the channel is
also 4:, there will be no affect selecting the picture
mode to AUTO mode.
WSS feature is only used in TV and F-AV modes. For
the Picture Mode selection in AV-1 and AV-2 the pin 8
(of Scart) value is used. In RGB and S-VHS modes the
Picture Mode can be 4: or 16:9. (Auto mode is not
available.).
When the menu appears on screen, picture mode will
automatically change to its default tube mode (4: or
16:9) but it will turned to its stored mode when the
menu disappears.
To Store the Settings
• Press "F" or "E" button on STORE option to store
Picture menu settings.
The stored picture mode setting will be valid only in
current program. However, the other stored values in
Picture Menu will be valid for all the programmes.

Feature Menu

• To enter the Feature menu directly, press the
"YELLOW" button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be
the first selected option. Use "F" or "E" button to
change the Sleep Timer values between OFF, 0:15:00,
0:0:00, 0:45:00, 1:00:00, 1:15:00, 1:0:00,
1:45:00 and 2:00:00.
child Lock
You can use this feature to prevent children turning on
TV or changing programs or adjustments etc. without
remote control.
The CHILD LOCK feature can be set by "F" or "E"
button to either ON or OFF. When OFF is selected,
there will be no difference in the operation of your TV.
When ON is selected, the TV can only be controlled
by the remote control handset. In this case, the front
panel buttons (except the Switch On/Off button) will
not work.
Selecting Menu Language
Menu language can be chosen by pressing "F" or
"E" button on LANGUAGE item.
Av-2 oUTPUT
From AV-2 Output, either TV or AV-1 can be given. TV
or AV-1 can be chosen by pressing "F" or "E" button
on „AV-2 OUTPUT".
To Store Settings
In Feature menu all settings are stored automatically.

Install Menu

• To enter the Install menu directly, press the "BLUE"
button.
Selecting Programme
To select programme number, you can use "F" or "E"
button, Digit Buttons or The Double Digit button with
digit buttons.
Selecting Band
BAND, can be chosen either,
• "C" or "S" by "F" or "E" button.
28