Picture Menu - Superior SP 7029/2 Bedienungsanleitung

MENU SYSTEM
In MODE item there are five predefined and one user
defined options. These are USER, CLASSIC, JAZZ,
ROCK, POP and FLAT. The predefined options can
not be changed by the user. If you change one of the
frequency values of the predefined options, the MODE
is switched automatically to USER option. The USER
option may be adjusted by the user.
The 5 items below the MODE are available to adjust
the sound settings in 5 frequency values: 120 Hz, 500
Hz, 1.5 kHz, 5 kHz and 10 kHz. To change the values
of 5 frequency options, select one of the options by
"H" or "G" button, and then press "E" to increase the
value, or "F" to decrease the value. In mid position,
cursor is displayed with the two reciprocal arrows.
To store the Equalizer settings, press "F" or "E"
button on "STORE" option.
During the store process all the items are stored,
moreover, the USER mode information would not be
lost. In other words, when the user mode is selected
again, after storing the MODE with one of the pre-
defined options, the user definde frequency values
would be set.
To change headphone Sound Settings
Pressing "F" or "E" button on HEADPHONE, enter
the Headphone menu. This is a sub-menu of Sound
menu, and all options in this menu are working as the
same in the Sound menu.
Setting headphone volume
• As you enter the Headphone sound menu, Volume
will be the first selected option.
• Press "E" button to increase volume.
• Press "F" button to decrease volume.
Setting headphone Balance
• When balance control is in mid position, the cursor
is displayed with the two reciprocal arrows.
• Using "H" or "G" button select Balance.
• Press "E" button to change balance rightwards.
• Press "F" button to change balance leftwards.
Setting headphone Mode
• Using "H" or "G" button select Mode.
Pressing "F" or "E" button will change the current
sound mode. (e.g.: If the current sound mode is stereo,
it will be stereo or vice versa).
In case of bilingual broadcast, you can select original
or dubbed language again using mode menu. So when
somebody listens to the original language from the
loudspeakers, somebody else can listen to the dubbed
language from headphone.
To Store the Settings
• Using "H" or "G" button select Store. Press "F" or
"E" button to store current headphone volume and
balance. The stored values will be valid for all the
programmes.
To Store the Settings
• Press "F" or "E" button on "STORE" option to
store Sound menu settings.

Picture Menu

• To enter the Picture menu directly, press the
"GREEN" button.
Setting the Brightness, contrast, colour and the
sharpness
• After selecting with the "H" or "G" button Bright-
ness, Contrast, Colour and the Sharpness settings
can be changed with the "F" or "E" buttons.
Setting hue
(During Playback NTSC system, this will appear in AV
mode only when NTSC video source is applied. Other-
27
GB